Nailers & Staple Guns

View
Sort By
Alphabetically (A - Z)
Products per Page
24
  • ARRET501
    Arrow ET501 Electric 2-in-1 Staple & Brad Tacker   ARRET501
    £46.79 Inc VAT
    £38.99 Ex VAT
    Product Code: ETB-ARRET501
  • BOS103201202
    Bostitch 10.320.1202 CEJN 320 Female Quick Release Nipple   BOS103201202
    £57.03 Inc VAT
    £47.53 Ex VAT
    Product Code: ETB-BOS1032012...
  • BOS103205152
    Bostitch 10.320.5152 Standard Male Hose Connector   BOS103205152
    £9.65 Inc VAT
    £8.04 Ex VAT
    Product Code: ETB-BOS1032051...
  • BOS103205202
    Bostitch 10.320.5202 CEJN 320 Female Nipple   BOS103205202
    £9.65 Inc VAT
    £8.04 Ex VAT
    Product Code: ETB-BOS1032052...
  • BOS1191501
    Bostitch 1191501 15mm S2 Wide Crown Staples Pack of 16800   BOS1191501
    £62.42 Inc VAT
    £52.02 Ex VAT
    Product Code: ETB-BOS1191501
  • BOS18G15FC
    Bostitch 15mm 18 Gauge Galvanised Brad Nails & Fuel (2000)   BOS18G15FC

    BT13 Series Galvanised 18 Gauge Brad Nails and Fuel.
    To Suit GBT1850K Cordless Gas Brad Nailer

    Finish nails (Brads) and T nails are normally of a rectangular cross section instead of being round.

    Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads.

    £26.45 Inc VAT
    £22.04 Ex VAT
    Product Code: ETB-BOS18G15FC
  • BOS1840600E
    Bostitch 1840600E Staple Stanox 6mm Pack of 10000 18406002   BOS1840600E

    Bostitch Stanox staples are also known as 84 series.

    For use with TU-216-84-E or other tools using 84 gauge.

    £10.50 Inc VAT
    £8.75 Ex VAT
    Product Code: ETB-BOS1840600...
  • BOS1840800E
    Bostitch 1840800E Staple Stanox 8mm Pack of 10000 18408002   BOS1840800E

    Bostitch Stanox staples are also known as 84 series.

    For use with TU-216-84-E or other tools using 84 gauge.

    £12.48 Inc VAT
    £10.40 Ex VAT
    Product Code: ETB-BOS1840800...
  • BOS1841000E
    Bostitch 1841000E Staple Stanox 10mm Pack of 10000 18410002   BOS1841000E

    Bostitch Stanox staples are also known as 84 series.

    For use with TU-216-84-E or other tools using 84 gauge.

    £13.33 Inc VAT
    £11.11 Ex VAT
    Product Code: ETB-BOS1841000...
  • BOS1841200E
    Bostitch 1841200E Staple Stanox 12mm Pack of 10000 18412002   BOS1841200E

    Bostitch Stanox staples are also known as 84 series.

    For use with TU-216-84-E or other tools using 84 gauge.

    £14.33 Inc VAT
    £11.94 Ex VAT
    Product Code: ETB-BOS1841200...
  • BOS1841400E
    Bostitch 1841400E Staple Stanox 14mm Pack of 10000 18414002   BOS1841400E

    Bostitch Stanox staples are also known as 84 series.

    For use with TU-216-84-E or other tools using 84 gauge.

    £15.15 Inc VAT
    £12.63 Ex VAT
    Product Code: ETB-BOS1841400...
  • BOS19PM
    Bostitch 19PM P.C.L Male Hose Connector   BOS19PM
    £13.87 Inc VAT
    £11.56 Ex VAT
    Product Code: ETB-BOS19PM
  • BOSN203R25Q
    Bostitch 2.1 x 25mm Coil Nails Ring Shank Bright Pack of 31,500   BOSN203R25Q

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £166.79 Inc VAT
    £138.99 Ex VAT
    Product Code: ETB-BOSN203R25...
  • BOSN203R35Q
    Bostitch 2.1 x 35mm Coil Nails Ring Shank Bright Pack of 24,500   BOSN203R35Q

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £144.18 Inc VAT
    £120.15 Ex VAT
    Product Code: ETB-BOSN203R35...
  • BOSN203R40GQ
    Bostitch 2.1 x 40mm Coil Nails Ring Shank Galvanised Pack of 24,500   BOSN203R40GQ

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £237.73 Inc VAT
    £198.11 Ex VAT
    Product Code: ETB-BOSN203R40...
  • BOSN230R45Q
    Bostitch 2.3 x 45mm Coil Nails Ring Shank Bright Pack of 16,500   BOSN230R45Q

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £130.99 Inc VAT
    £109.16 Ex VAT
    Product Code: ETB-BOSN230R45...
  • BOSN230R50Q
    Bostitch 2.3 x 50mm Coil Nails Ring Shank Bright Pack of 13,200   BOSN230R50Q

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £111.80 Inc VAT
    £93.17 Ex VAT
    Product Code: ETB-BOSN230R50...
  • BOSN230R50GQ
    Bostitch 2.3 x 50mm Coil Nails Ring Shank Galvanised Pack of 13,200   BOSN230R50GQ

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £166.56 Inc VAT
    £138.80 Ex VAT
    Product Code: ETB-BOSN230R50...
  • BOSN230R55Q
    Bostitch 2.3 x 55mm Coil Nails Ring Shank Bright Pack of 13,200   BOSN230R55Q

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £116.50 Inc VAT
    £97.08 Ex VAT
    Product Code: ETB-BOSN230R55...
  • BOSN230R55GQ
    Bostitch 2.3 x 55mm Coil Nails Ring Shank Galvanised Pack of 13,200   BOSN230R55GQ

    Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

    All Coil Nails are Round Head nails.

    Typically:

    Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.

    Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.

    Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

    15° Collation angle

    Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    For use with:

    N57C-1CE heavy-duty Coil Nailer

    N58C-1-E Coil Nailer

    N58C-1-E Coil Nailer

    N66C-2-E Coil Nailer

    £182.29 Inc VAT
    £151.91 Ex VAT
    Product Code: ETB-BOSN230R55...
  • BOSRH25R5050
    Bostitch 2.5 x 50mm 21° Stick Nails Ring Shank Galvanised (2000)   BOSRH25R5050

    Packs of 2000 Round head nails.

    These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.

    Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

    Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    £49.96 Inc VAT
    £41.63 Ex VAT
    Product Code: ETB-BOSRH25R50...
  • BOSRH25R5550
    Bostitch 2.5 x 55mm 21° Stick Nails Ring Shank Galvanised (2000)   BOSRH25R5550

    Packs of 2000 Round head nails.

    These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.

    Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

    Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    £52.24 Inc VAT
    £43.53 Ex VAT
    Product Code: ETB-BOSRH25R55...
  • BOSRH28R5050
    Bostitch 2.8 x 50mm 21° Stick Nails Ring Shank Galvanised (2000)   BOSRH28R5050

    Packs of 2000 Round head nails.

    These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.

    Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

    Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

    Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

    Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

    £52.00 Inc VAT
    £43.33 Ex VAT
    Product Code: ETB-BOSRH28R50...