General Hardware

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.
2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.

This Forge Auto Gate Latch will automatically latch when the gate is pulled to the closed position. Ideal for gates in fields where easy access is preferred over security. Also used widely for garden gates.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Position the keep on the fence post and mark the fixing holes with a pencil. Drill pilot holes with a Ø2mm drillbit and fasten in place using screws provided.
2. with the gate closed, position the latch arm so that it is engaged in the lock and screw into position using the fixings supplied.

Forge Backflap Hinges often used for bolting scenery to a base or stage floor.

Zinc plated for a long-lasting attractive finish. Supplied with all fixings.

Pack of 2.

Forge Backflap Hinges often used for bolting scenery to a base or stage floor.

Zinc plated for a long-lasting attractive finish. Supplied with all fixings.

Pack of 2.

Forge black powder coated light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge black powder coated light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge polished chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge polished chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge polished chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge polished chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge polished chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge satin chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge satin chrome finished steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge zinc plated steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

This Forge strong wire Cabin Hook is ideal for securing or holding back doors or gates. Black powder coated for outdoor use.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Place cabin hook in the desired position, and mark fixing holes with a pencil.
2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.
3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.

This Forge strong wire Cabin Hook is ideal for securing or holding back doors or gates. Black powder coated for outdoor use.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Place cabin hook in the desired position, and mark fixing holes with a pencil.
2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.
3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.